Improvement on Conductivity for Thick Film Aluminum Paste.

With the development of thick-film paste, silver and copper are circulating in the market as the electric conductive fillings currently. Unfortunately, the cost of silver is exceedingly high, while the copper has to be sintered in the reducing atmosphere. In this study, we proposed to exert aluminum as the filling due to its low cost, good electrical conductivity, and capability of being sintered in air. By means of the fracture mechanism of the oxidation layer of the Al surface and the liquid phase sintering, the Al paste with high solid content is used to implement high electrical conductivity. Based on that Al powder with large particle size tends to fracture easily, while it is easy for Al powder with small size to fill the gap, we mixed Al powder with large and small particle sizes at different proportion, so that the internal micro-structure and the oxidization are observed. However, when glass frit was added into mixed Al powder, the Al particles are wet by glass frit for bonding Al particles as well as inhibiting oxidation. Effect of the glass frit content and the solid content of Al paste on conductivity are investigated in this study. The sheet resistance of Al paste sintered at 850 °C for 10 min. can be reduced to 4.5 mΩ/□ when Al paste is formulated based on the mixed Al particles with proportion of big to small (4:1) at 10 wt% glass frit content and 80 wt% solid content.

Improvement on Conductivity for Thick Film Aluminum Paste.

With the development of thick-film paste, silver and copper are circulating in the market as the electric conductive fillings currently. Unfortunately, the cost of silver is exceedingly high, while the copper has to be sintered in the reducing atmosphere. In this study, we proposed to exert aluminum as the filling due to its low cost, good electrical conductivity, and capability of being sintered in air. By means of the fracture mechanism of the oxidation layer of the Al surface and the liquid phase sintering, the Al paste with high solid content is used to implement high electrical conductivity. Based on that Al powder with large particle size tends to fracture easily, while it is easy for Al powder with small size to fill the gap, we mixed Al powder with large and small particle sizes at different proportion, so that the internal micro-structure and the oxidization are observed. However, when glass frit was added into mixed Al powder, the Al particles are wet by glass frit for bonding Al particles as well as inhibiting oxidation. Effect of the glass frit content and the solid content of Al paste on conductivity are investigated in this study. The sheet resistance of Al paste sintered at 850 °C for 10 min. can be reduced to 4.5 mΩ/□ when Al paste is formulated based on the mixed Al particles with proportion of big to small (4:1) at 10 wt% glass frit content and 80 wt% solid content.

Influence of Plasma Ultraviolet/Vacuum Ultraviolet Irradiation Damage on Silicon Metal-Oxide-Semiconductor Capacitor During Etching.

In this study, we evaluate the defects and charges caused by the ultraviolet (UV)/vacuum ultraviolet (VUV) irradiation in the high-k/metal gate stack structure, especially in HfO2 layer and at Si/HfO2 interface. First, we measured the photons irradiating to the surface in the neutral beam etching (NBE) system and in the conventional inductively coupled plasma (ICP) system through optical emission spectroscopy (OES), respectively. By using this method, we evaluate the ability of reducing UV/VUV irradiation damage in the NBE system. As a result, photon intensity detected in the ICP system shows larger magnitude as compared to the NBE system, which indicates the UV/VUV irradiation is more severe in the ICP system. Moreover, in order to understand the twisting of electrical characteristics caused by UV/VUV irradiation, we set the prefabricated metal-oxide-semiconductor (MOS) capacitors in both systems to absorb the irradiation of UV/VUV photons respectively. The electrical characteristics of the etched MOS capacitors and its related plasma-induced damage model are discussed. The result of the devices exposed in the ICP system reveals a greater electrical characteristics shift compared to the devices in NBE such as the interface trap density (Dit) in case of NBE is 3.55621×1012 cm-2eV-1 and in case of ICP is higher i.e., 4.19961×1012 cm-2eV-1.

High genetic variability in an ecologically variable vertebrate, Bufo viridis.

Allozymic variation in proteins encoded by 26 loci was analyzed electrophoretically in 517 specimens of green toads from 11 populations from Israel and one population from Vis Island in the Adriatic Sea. Genetic variation in this toad is the highest yet reported in any vertebrate. All three genetic parameters, mean number of alleles per locus (A), mean proportion of loci polymorphic per population (P), and mean number of heterozygous loci per individual (H), are very high (A = 1.65, range 1.38-2.04; P = 0.423, range 0.346-0.615; H = 0.133, range 0.108-0.159). Central and marginal mainland populations are only slightly more variable than desert isolates, but much more variable than the Vis Island population. Genetic similarity is very high between mainland populations (S = 0.951, range 0.93-0.97). Frequencies of two alleles (Icd-lc and Tfa) are correlated with an ecological gradient of increasing aridity. Regulatory enzymes appeared to contribute more to overall polymorphism than non-regulatory enzymes. The genetic variation observed suggests that selection for heterozygosity as an adaptive strategy is operating in the ecologically variable environment in which green toads live.

Genetic variation as a test of natural selection.

Allozymic variation encoded by 26 loci was analyzed electrophoretically in 507 specimens representing 12 populations of green toads, Bufo viridis, in Israel and the Vis Adriatic Island. Genetic variation in Bufo viridis is higher than in any vertebrate yet studied. Mean heterozygosity per locus per individual (H) is 0.133 (range, 0.105 to 0.159). H is higher in central populations as compared with isolates, and varies among four major protein classes, being highest in transferases and hydrolases and lowest in oxidoreductases and nonenzymatic proteins. Differential gene frequencies among polymorphisms was tested as an indicator of natural selection. Significant heterogeneity between loci in their apparent inbreeding coefficients Fe=S-2p/P(1-p) was found for all alleles and for each of the four major classes of proteins tested, which may be taken as evidence of selection. Both uniform and diversifying selection are suggested by the low and high Fe values, respectively. The general pattern of high heterozygosity in Bufo viridis is best explained as an adaptive strategy in heterogeneous environments.